1. Home
  2. Acrylic Information
Acrylic Information

As an acrylic display supplier, we have added some additional information about acrylics in order for customers to know exactly what they need and want for an acrylic display solution.

    1. Lay the two organic glass plates to be spliced next to each other in a horizontal manner on the operation bench. Place tape on the bottom, and reserve a gap of 0.03mm in which to inject the adhesive. Through this gap, gently inject the adhesive in an even manner with the applicator until the gap is fully closed. Finally, remove the tape after complete curing.
    1. Separating and dissolving techniques. We can extract resin from organic glass for its various melting and softening points using modern techniques. This allows us to fully recycle the glass and eliminate pollution to the air, water, and land. We classify organic glass in advance to make proper use of the resources.
    1. Twist off the caps of comparable sign standoffs and fix the sign standoffs to the acrylic board surface. Then use a drill to drive 4 sign standoffs at each corner.
      Place the acrylic display board at the position to be fixed. In order to settle the board at a right angle, you can mark the corner at first and check to see if it is straight.
      After that, punch 4 holes in the wall with an electric drill and plug the wall anchors into the holes.
    1. Acrylic sheets are widely used in display applications for the advertising of things like furniture, cars, and events. In China, there are many different acrylic sheet plants whose products can wildly vary in quality. Here at Trust-Sun, we can identify the quality of acrylic sheet through 5 methods.
    1. Acrylic sheet is a special organic material. Some cracks will appear after some treatment, but they can be filled with resin or paint and be polished.
      If there is some dust on the surface of acrylic board, you can clean it with a wet washing cloth. Don't clean directly by dry cloth or use cleaning agent of high cleaning efficiency which would damage the acrylic surface.
    1. There are a lot of display panel board materials to choose from. The most popular type is PS foam board. The thickness of PS foam board is about 5mm to 8mm. Although PS foam board is relatively thin, it is cheap and light. It hangs on any wall with ease. The only negative is that the material can be fragile.